WPC Outdoor Decking Floor for Resort Poolside & Theme Park Walkways | Anti-Slip, UV Resistant, Low Maintenance Deck Boards

Through high-precision mold embossing and surface lamination technology, 20+ kinds of natural wood grains, such as oak, teak, walnut, etc., are reproduced, with a texture clarity of 0.1mm and a touch close to that of solid wood.

Some high-end products use 3D relief technology to enhance the three-dimensional light and shadow effect.

Using two-component UV curing coloring technology, the color paste penetrates deeply into the surface of the material below 50μm, avoiding the defect of easy peeling of traditional surface spraying.

Provide 12 kinds of original wood colors and 6 kinds of artistic coatings (such as aging and carbonization), support customized gradients, color matching, and other personalized solutions.

The surface microstructure design (Ra 2.5-3.5μm) makes the light diffusely reflect, avoiding glare under strong light, while maintaining uniform color under different humidity environments, and no "water stains" after rain.

Core layer:

high-density wood fiber and recycled plastic blend, density of 1.3-1.5g/cm³, compressive strength ≥30MPa;

Buffer layer:

absorb impact load and reduce walking fatigue;

Protective layer:

0.8-1.2mm thick co-extruded film, with both wear resistance and anti-fouling functions.

Through dual life design:

Physical performance life:

Under standard use conditions (average daily exposure of 4 hours), compressive strength retention rate ≥95% (25 years);

Appearance shelf life:

surface color difference ΔE≤3 (20 years), no cracking or powdering.

Anti-slip level:

R11 (dynamic anti-slip coefficient ≥ 0.6), better than ordinary tiles (R10);

Compression load:

dynamic load ≥ 350kg/m², can withstand the crushing of heavy objects such as dining cars and barbecue grills;

Impact resistance:

drop hammer impact strength ≥ 10J (no cracks), which is 3 times that of solid wood.